Companies · Products · Copper · Plate, sheet and strip · Copper
Copper strip in coils
Refined copper sheet and strip over 0.15 mm thick in coils (electrical strip, heat-exchanger strip, roofing coils). Aluminium counterpart: aluminium sheet and strip (under 6 mm) – competing use: strip for heat exchangers. Zinc counterpart: zinc sheet, strip and foil (incl. titanium-zinc) – competing use: roofing, facades and rainwater systems.
- Metal
- Copper
- CN
7409 11 00- PRODCOM
24.44.24.00- Form in the R02 forecast
- Copper plate, sheet and strip (incl. foil)
semis.copper.sheet_strip
- 16
- producing plants (incl. outside the EU) of which in the EU-27: 15
- 16
- companies
- 10
- countries
- 15.4%
- non-EU control – plants in the EU-27
Corporate groups (a company without a group counted separately): 13
Non-EU control – plants in the EU-27: 2 of 13 plants with an established controller (15 of 16 producing plants are in the EU-27; plants outside the EU are out of scope of the indicator; ownership control logic and area).
No document states a capacity for this class – no sum is computed.
Data as of: · version 2.26 · verified at source up to · Dataset changes · Markdown · JSON
Map of plants
Producers
Each entry from a primary document (class A/B/C and document page), with the verification date and the entity controlling the plant (GLEIF Level 2 or company documents).
EU-27 trade with non-EU countries
Imports into the EU-27 from non-EU countries and exports from the EU-27 to them (without trade between EU countries), tonnes and euro, 2015–2025.
Annual series (table)
| Year | Imports (t) | Exports (t) | Balance (t) | Imports (EUR m) | Exports (EUR m) |
|---|---|---|---|---|---|
| 2015 | 4,074 | 65,282 | 61,208 | 26.3 | 411.8 |
| 2016 | 4,172 | 67,836 | 63,664 | 24.5 | 376.2 |
| 2017 | 4,718 | 73,428 | 68,710 | 32.0 | 494.1 |
| 2018 | 4,261 | 75,275 | 71,015 | 30.0 | 518.5 |
| 2019 | 4,302 | 62,455 | 58,153 | 30.3 | 425.1 |
| 2020 | 5,566 | 58,838 | 53,272 | 37.8 | 393.9 |
| 2021 | 9,828 | 60,587 | 50,759 | 97.5 | 548.5 |
| 2022 | 17,304 | 58,771 | 41,467 | 192.6 | 627.1 |
| 2023 | 22,157 | 48,572 | 26,415 | 220.3 | 511.1 |
| 2024 | 24,853 | 44,346 | 19,494 | 252.8 | 499.3 |
| 2025 | 23,601 | 44,662 | 21,061 | 244.8 | 504.7 |
| 2026 partial data 2026-01/2026-08 | 17,275 | 24,434 | 7,160 | 218.7 | 343.8 |
In 2025: imports 23,601 t, exports 44,662 t, balance 21,061 t (EUR 260.0 m).
Largest non-EU suppliers, 2025
- Bosnia and Herzegovina 6,926 t
- China 5,727 t
- Serbia 4,683 t
- Türkiye 3,511 t
- South Korea 1,080 t
Largest non-EU customers, 2025
- United States 14,832 t
- China 7,160 t
- Switzerland 6,754 t
- United Kingdom 3,651 t
- Türkiye 3,539 t
Source: Eurostat Comext – EU trade by CN8 (DS-045409); data retrieved: 2026-10-19. CN codes of the class as in the header; balance = exports – imports. Comext
Counterparts in other metals
Substitute product in aluminium: Al Aluminium sheet and strip (under 6 mm). Common application: strip for heat exchangers.
| Cu Copper strip in coils | Al Aluminium sheet and strip (under 6 mm) | |
|---|---|---|
| producing plants (incl. outside the EU) | 16 | 37 |
| countries | 10 | 19 |
| Extra-EU imports 2025 (t) | 23,601 | 558,076 |
| Extra-EU exports 2025 (t) | 44,662 | 387,674 |
Substitute product in zinc: Zn Zinc sheet, strip and foil (incl. titanium-zinc). Common application: roofing, facades and rainwater systems.
| Cu Copper strip in coils | Zn Zinc sheet, strip and foil (incl. titanium-zinc) | |
|---|---|---|
| producing plants (incl. outside the EU) | 16 | 7 |
| countries | 10 | 6 |
| Extra-EU imports 2025 (t) | 23,601 | 7,758 |
| Extra-EU exports 2025 (t) | 44,662 | 10,152 |
Figures of both classes come from the same sources (entries from documents, Comext); copper, aluminium and zinc figures are never added up, and a pair does not mean interchangeability in every application.
Related
- Form in the R02 forecast: Copper plate, sheet and strip (incl. foil) median 2031: 289.3 kt (EU-27)
- Flow analysis: EU Copper Flow Analysis
- Ownership control of the producers: Ownership control (product filter)
- Companies list and map filtered to this class: Companies
Method note
- Entry only from a primary document
- A class is assigned to a plant only when a primary document names it – a product data sheet, an annual report, a register or a company page describing the product – with the document page and a reliability class (A, B or C). Press and company directories without a company document are not a basis for an entry.
- Assignment from a location document
- When a company document describes the product and only a location page points to the plant, the assignment of the product to the plant is an inference – the source then has class C and the entry awaits confirmation by a plant document.
- “Full range” is not an entry
- A general claim (“full range of copper products”) without the class, dimensions or alloys does not create an entry. A plant without an entry may make the class – the register does not know.
- Capacity only from a document
- Class capacity (kt) – only when a document states it; no estimates and no split of a whole plant’s capacity into classes. The sum covers only plants with a stated capacity and is a lower bound – always given with the number of plants it covers.
- Entry status
- Produced, planned production (investment announced in a document), production ended. A closed plant – production ended. Key figures – “produced” only.
- Ownership control
- The entity controlling the plant and its country – as in Ownership control (GLEIF Level 2, GLEIF exceptions, groups from company documents). The non-EU share is computed only among producers located in the EU-27 with an established controller (as the default area of Ownership control); a plant outside the EU – e.g. in Türkiye, the United Kingdom, Switzerland or Serbia – is out of scope of the indicator, although it counts among plants and countries.
- Trade
- Eurostat Comext: EU-27 with non-EU countries, CN codes of the class (sum of the codes), tonnes and euro. A CN code may cover products of other classes (e.g. rods and sections in one code) – trade describes CN codes, not the plants of the register.
- Metals kept apart
- Each class belongs to one metal (aluminium, copper, zinc). Each metal has its own page; the metals share a family layout – five semi-finished product families (wire rod and wire; bars and sections; plate, sheet and strip; foil; tubes), families outside semi-finished products (unwrought alloys – feedstock, powders and dust, chemical compounds, anodes and other articles – currently zinc only) and derived products; split by material within a family. A family without classes of a metal shows “–” with a description in the comparison table. Header figures and trade totals are given separately for each metal – tonnes of different metals are never added up. Derived products (e.g. winding wire, structures, cans, stranded wire, zinc-coated steel, die castings) are marked and are not semi-finished products; tonnes of coated steel are the mass of the product, not of zinc. A class outside the metal trade total (coated steel, zinc oxide, die castings without a CN code) carries a note with the reason.
- Counterpart in the other metal
- A copper ↔ aluminium substitution pair (e.g. wire, coiled tubes, strip, stranded wire) comes from the dictionary field or from the portal map of pairs. The comparison shows the figures of both classes side by side, without a total, and the application sentence has no figures; a pair does not mean interchangeability in every application.
- Links by metal
- Copper classes have a form in the R02 forecast and the EU copper flow analysis; aluminium classes – the EU aluminium flow analysis and the country analyses; zinc classes – the EU zinc flow analysis and the country analysis for Poland (the R01 and R02 forecasts cover copper only). An analysis link given with the class takes precedence.
- Pilot coverage
- The pilot covers copper and aluminium semi-finished products and their alloys, and zinc products (titanium-zinc sheet, unwrought alloys, powders and dust, anodes, derived products) at plants of the Companies register. Counts of plants, countries and groups and the capacity sum are a lower bound of the market – they grow with further documents.
Pages and Markdown are open to text and data mining with attribution; JSON data – like the other JSON data of the register – are reserved as a database compilation. Trade data: Eurostat (reuse with attribution).