Aluminium foil containers

Map of plants

Producers

Each entry from a primary document (class A/B/C and document page), with the verification date and the entity controlling the plant (GLEIF Level 2 or company documents).

Compare the first 5 producers

EU-27 trade with non-EU countries

Imports into the EU-27 from non-EU countries and exports from the EU-27 to them (without trade between EU countries), tonnes and euro, 2015–2025.

Annual series (table)

Year	Imports (t)	Exports (t)	Balance (t)	Imports (EUR m)	Exports (EUR m)
2015	3,938	4,182	244	21.6	28.8
2016	2,937	6,802	3,865	16.7	46.5
2017	3,553	8,671	5,118	27.0	59.6
2018	13,982	8,739	-5,243	30.5	59.5
2019	3,670	8,890	5,220	42.3	61.3
2020	5,049	9,609	4,560	57.3	64.3
2021	5,134	9,985	4,851	52.7	66.0
2022	5,569	11,354	5,785	58.7	92.3
2023	4,227	9,740	5,514	50.2	89.4
2024	1,576	8,755	7,179	14.3	81.3
2025	2,515	9,877	7,362	33.9	90.5
2026 partial data 2026-01/2026-08	2,811	6,494	3,683	42.4	62.2

In 2025: imports 2,515 t, exports 9,877 t, balance 7,362 t (EUR 56.6 m).

Source: Eurostat Comext – EU trade by CN8 (DS-045409); data retrieved: 2026-10-19. CN codes of the class as in the header; balance = exports – imports. Comext

Related

• Flow analysis: EU-27 Aluminium Flows
• Country aluminium flow analyses: Aluminium Flows in Austria · Aluminium Flows in France · Aluminium Flows in Germany · Aluminium Flows in Italy · Aluminium Flows in Poland
• Ownership control of the producers: Ownership control (product filter)
• Companies list and map filtered to this class: Companies

Method note

Entry only from a primary document

A class is assigned to a plant only when a primary document names it – a product data sheet, an annual report, a register or a company page describing the product – with the document page and a reliability class (A, B or C). Press and company directories without a company document are not a basis for an entry.

Assignment from a location document

When a company document describes the product and only a location page points to the plant, the assignment of the product to the plant is an inference – the source then has class C and the entry awaits confirmation by a plant document.

“Full range” is not an entry

A general claim (“full range of copper products”) without the class, dimensions or alloys does not create an entry. A plant without an entry may make the class – the register does not know.

Capacity only from a document

Class capacity (kt) – only when a document states it; no estimates and no split of a whole plant’s capacity into classes. The sum covers only plants with a stated capacity and is a lower bound – always given with the number of plants it covers.

Entry status

Produced, planned production (investment announced in a document), production ended. A closed plant – production ended. Key figures – “produced” only.

Ownership control

The entity controlling the plant and its country – as in Ownership control (GLEIF Level 2, GLEIF exceptions, groups from company documents). The non-EU share is computed only among producers located in the EU-27 with an established controller (as the default area of Ownership control); a plant outside the EU – e.g. in Türkiye, the United Kingdom, Switzerland or Serbia – is out of scope of the indicator, although it counts among plants and countries.

Trade

Eurostat Comext: EU-27 with non-EU countries, CN codes of the class (sum of the codes), tonnes and euro. A CN code may cover products of other classes (e.g. rods and sections in one code) – trade describes CN codes, not the plants of the register.

Metals kept apart

Each class belongs to one metal (aluminium, copper, zinc). Each metal has its own page; the metals share a family layout – five semi-finished product families (wire rod and wire; bars and sections; plate, sheet and strip; foil; tubes), families outside semi-finished products (unwrought alloys – feedstock, powders and dust, chemical compounds, anodes and other articles – currently zinc only) and derived products; split by material within a family. A family without classes of a metal shows “–” with a description in the comparison table. Header figures and trade totals are given separately for each metal – tonnes of different metals are never added up. Derived products (e.g. winding wire, structures, cans, stranded wire, zinc-coated steel, die castings) are marked and are not semi-finished products; tonnes of coated steel are the mass of the product, not of zinc. A class outside the metal trade total (coated steel, zinc oxide, die castings without a CN code) carries a note with the reason.

Counterpart in the other metal

A copper ↔ aluminium substitution pair (e.g. wire, coiled tubes, strip, stranded wire) comes from the dictionary field or from the portal map of pairs. The comparison shows the figures of both classes side by side, without a total, and the application sentence has no figures; a pair does not mean interchangeability in every application.

Links by metal

Copper classes have a form in the R02 forecast and the EU copper flow analysis; aluminium classes – the EU aluminium flow analysis and the country analyses; zinc classes – the EU zinc flow analysis and the country analysis for Poland (the R01 and R02 forecasts cover copper only). An analysis link given with the class takes precedence.

Pilot coverage

The pilot covers copper and aluminium semi-finished products and their alloys, and zinc products (titanium-zinc sheet, unwrought alloys, powders and dust, anodes, derived products) at plants of the Companies register. Counts of plants, countries and groups and the capacity sum are a lower bound of the market – they grow with further documents.

Pages and Markdown are open to text and data mining with attribution; JSON data – like the other JSON data of the register – are reserved as a database compilation. Trade data: Eurostat (reuse with attribution).

← All product classes · All companies