# OTTO FUCHS KG

Ownership path: OTTO FUCHS KG (company, LEI 529900XQ5VE29M4YG662) → [OTTO FUCHS Beteiligungen KG](https://ai-waw.com/en/companies/groups/otto-fuchs-beteiligungen-kg.md) (corporate group, LEI 529900QLJDGV1OZYZD38)  
Country of seat: Germany  
Data as of: 2026-10-21, version 2.32  
Page: https://ai-waw.com/en/companies/otto-fuchs-kg

## Plants

### foundry (Gießerei) Meinerzhagen (Meinerzhagen, Germany)

- Link: extrusion plant
- Status: operating
- Metals: aluminium, copper
- Coordinates: 51.108, 7.65
- Source [B]: Company website (otto-fuchs.com) – https://www.otto-fuchs.com/en/
- Source [B]: Aluminium Stewardship Initiative, member profile “OTTO FUCHS KG & Schüco International KG” – Performance Standard V3.1 Transitional (Principles 1–4), certificate no. 307 Rev. 2, 05.09.2023–31.05.2028 (ASI data, CC BY 4.0 licence) – https://aluminium-stewardship.org/about-asi/members/OTTO-FUCHS-KG---Sch--co-International-KG
- Source [B]: OTTO FUCHS KG, company page “OTTO FUCHS KG” (profile of the Meinerzhagen plant), plant profile – https://www.otto-fuchs.com/en/company/otto-fuchs-group/otto-fuchs-kg
- Note: The plant in Meinerzhagen combines a forge, large and small extrusion plants and wheel production with its own foundry, which supplies this chain with round billets. The company states that approx. 88% of the aluminium processed in the foundry came (2020) from returned material from its own production – flash, press remnants and turnings – and the share of secondary aluminium in the whole operation was 72%. The foundry expansion was to raise recycling capacity by 20 kt per year; total remelting capacity is not published. The furnace park is based on Hertwich Ecomelt units: the fifth and largest of them, Ecomelt-PS150, has a throughput of 7.7 t/h, and the melting modernisation was to deliver approx. 6 kt of CO2 savings per year plus approx. 3 kt from higher metal yield. Separately, the company receives liquid primary aluminium directly from TRIMET. In January 2024 Bezirksregierung Arnsberg issued a decision for the melting and casting installation in Meinerzhagen. A family company operating since 1910, employing over five thousand people and operating nine locations worldwide. Besides profile extrusion it carries out die forging in aluminium, magnesium, titanium and nickel, serving aerospace, automotive and general industry. It is one of the few European plants combining extrusion of 7xxx series alloys with full heat treatment. The company does not publish production capacities. The largest independent European aluminium forger and one of the few suppliers of forged wheels for premium cars. Unlike foundries it does not buy casting alloy, but wrought ingots from 6xxx (6082, 6061) and 7xxx alloys for forgings of the highest strength – so it is a consumer of primary aluminium or high-grade wrought scrap, not mixed scrap. This difference in charge explains why aluminium forging benefits little from the growing supply of end-of-life scrap. The company does not publish throughput.
- Verified at source: 2026-10-08

## Products

- [Aluminium alloy profiles](https://ai-waw.com/en/companies/products/al-profile.md) – foundry (Gießerei) Meinerzhagen (Meinerzhagen)

## Scrap buyer

> A picture of the market – not a commercial recommendation.

- foundry (Gießerei) Meinerzhagen (Meinerzhagen, Germany): smelter – scrap intake inferred from the type of plant, not from a document; Metal: copper, aluminium; Accepted grades: grades not established in the register documents

[Scrap buyers in the Recycling tab](https://ai-waw.com/en/recycling.md)

## Technology suppliers

- COIM S.r.l. Costruzioni Impianti e Montaggi Industriali → [foundry (Gießerei) Meinerzhagen (OTTO FUCHS KG, Meinerzhagen)](https://ai-waw.com/en/companies/otto-fuchs-kg#aleu-p272): extrusion billet heater – Two gas-fired billet heaters for brass and brass alloys (230 mm) with energy saving system (reference list, 2023). (2023); delivered; Source [B] Company website – COIM reference list (PDF, coimsrl.net) – https://www.coimsrl.net/pdf/reference/Reference_Coim.pdf
- Hertwich Engineering GmbH → [foundry (Gießerei) Meinerzhagen (OTTO FUCHS KG, Meinerzhagen)](https://ai-waw.com/en/companies/otto-fuchs-kg#aleu-p272): fuel-fired melting and holding furnace – Ecomelt-PS150 multi-chamber melting furnace (7.7 t/h) and two 20 t tilting holding and casting furnaces for the Otto Fuchs casthouse in Meinerzhagen. (2019); ordered; Source [B] Hertwich Engineering press release of 03.12.2019 on an order from Otto Fuchs (hertwich.com) – https://www.hertwich.com/news-media/news/otto-fuchs-orders-aluminium-multi-chamber-melting-furnace-from-hertwich

## Metal flow analyses

- [Copper Flows in Germany](https://ai-waw.com/en/metal-flows/copper-flows-germany.md)
- [Aluminium Flows in Germany](https://ai-waw.com/en/metal-flows/aluminium-flows-germany.md)
- [EU Copper Flow Analysis](https://ai-waw.com/en/metal-flows/eu-copper-flow-analysis.md)
- [EU-27 Aluminium Flows](https://ai-waw.com/en/metal-flows/eu-aluminium-flow-analysis.md)